My turbo civic build.

[Sal]

As some of you know already i've been working on building a B18c1 turbo'd 94 civic hatchback. My goal is to get it built and tuned by August 31'st assuming all the parts and machine work arrive and get finished as scheduled. I'll add pictutes of my progress of the car, and parts that have already arrived, tonight when i get home. I will continue to update them as i work on the car. Feel free to any add comments and suggestions, good or bad.

[fusermajig]

Well, I don't need to say anything bad. I'll just say "you're building a honda?".

Tsk tsk, Sal. :D

[Sal]

Heres a few pictures that i took tonight... ill have better pics of the car once i roll it outside.

B18C1 Block:
http://img204.imageshack.us/img204/7082/10008549ca.jpg
Neukin turbo manifold, downpipe, dumptube and Eagle rods:
http://img116.imageshack.us/img116/7204/10008411iq.jpg
Neukin t3 manifold:
http://img356.imageshack.us/img356/6804/10008635im.jpg
http://img109.imageshack.us/img109/4604/10008656lk.jpg
http://img129.imageshack.us/img129/1397/10008689fi.jpg
Precision Intercooler (31" x 8" x 3.5"):
http://img144.imageshack.us/img144/9531/1000872copy0gb.jpg
Interior:
http://img145.imageshack.us/img145/3320/10008427cq.jpg
http://img144.imageshack.us/img144/1254/10008472yv.jpg
Brake line maze in engine bay:
http://img119.imageshack.us/img119/874/10008484zs.jpg
http://img204.imageshack.us/img204/9533/10008524nw.jpg

[fusermajig]

Look at that fucking gutted ass civic. That color is sure gonna attract some attention. I kinda like it. Good luck putting her back together. Looks like a nice big pain in the ass.

[fusermajig]

I just realized too. If you can, I would fill in those door guard holes. I'm guessing you're probably putting them back on, but I would try and fill them in to give it a nice clean look.

[fusermajig]

Ok, just to clarify so that last post doesn't sound stupid, I meant the whole cutout where the door guards were before, like the valleys, not just the screw or tab holes.

[Sal]

The full interior is going back in the car, so everything will be covered up.

[Sal]

And if you were talking about the side moldings, no i am not going to shave them... i have the moldings to go back in.

[Sal]

Pics of the head should be up sometime tommorow, i just picked it up.

[Pete]

I didnt see any pictures of a turbo, and have you been working on this so you can meet your deadline?

[Sal]

What deadline would that be? and the turbo should be in sometime this afternoon.

[Pete]

As some of you know already i've been working on building a B18c1 turbo'd 94 civic hatchback. My goal is to get it built and tuned by August 31'st assuming all the parts and machine work arrive and get finished as scheduled. I'll add pictutes of my progress of the car, and parts that have already arrived, tonight when i get home. I will continue to update them as i work on the car. Feel free to any add comments and suggestions, good or bad. That one, i guess.

[Pete]

Have you gotten the interior back into the car yet?

[Sal]

Interior will be in this weekend, and hopefully the rest of the car will be assembled minus the engine. I'm still hoping to get the car built by the end of August. And pics of the turbo will be up shortly.

[Pete]

can't wait....this is going to be the car to beat in town

[Sal]

Haha, you at least have to break out of the 15's with the stang before you can start talking shit.

[Pete]

what are you talking about I'm not talking shit? I said this is going to be the car to beat, meaning it going to be very fast and hard to beat. Thats kind of a compliment dipshit. And theres no need to bring up how slow I am thats just uncalled for and kind of embarassing. Now donate some money to me b/c you're an asshole

[KGP]

Haha!

[Sal]

Haha i must have misunderstood you then, sorry about that. I'll give you a one dollar donation for the mishap.

[fusermajig]

lol, you guys are funny.

Get your ass working and getting this together, and make sure to take a bunch of pics. I'm all sad that I won't be doing anyting else to my car for awhile now that I'm going off to maine. :(

[Sal]

Many pics will be up on monday, im hoping to get most of the car done this weekend.

[Pete]

fuser what do you have done to your celica?

[fusermajig]

Injen short-ram, DC Header, stock exhaust with the muffler cut out (muffler shop doesn't know how to follow instructions), rotota slotted rotors, ebc green stuff brakes, stainless steel brake and clutch lines, b&m short shifter, and tein s-tech springs.

[Sal]

Heres some pics of the GT35R...

http://img226.imageshack.us/img226/5805/1001016fy4.jpg
http://img95.imageshack.us/img95/6934/1001019rz9.jpg
http://img142.imageshack.us/img142/7512/1001021vb5.jpg
http://img218.imageshack.us/img218/7135/1001023fj9.jpg
http://img218.imageshack.us/img218/3711/1001026jb2.jpg

[KGP]

Its cute Sal. :D

j/k, on your motor that should be a BEAST! get that thing together!

[Sal]

Haha its cute compared to the monster r85 in the display case in here.

[fusermajig]

Haha its cute compared to the monster r85 in the display case in here.

LOL> Yeah, that fucking thing is insane. I still can't understand how that thing doesn't blow a fucking rx7 motor to pieces. That thing should be on a fucking MAC truck.

[KGP]

it really isnt that big....

[Pete]

it really isnt that big....
thats what she said

Sal nice, can't wait

[fusermajig]

Big enough to blow anything up that I know of, lol.

[Pete]

we need an update

[dakotakeith]

sal are u ever gonna finish the beast

[KGP]

Sal needs to post some progress pics... it is in a much more complete state right now....

[Sal]

Updates will be up soon. I havent been getting all the time i would like to work on the car because of gay school. Car should be running tonight, and turbod and tuned mid January. Ill try to upload some pics of it tonight or tommorow.

[Sal]

Just got it running descent on the motor. Hopefully i can work out all of the bugs and turbo it next week depending on how much time i get to work on it. I'll put up some new pics whenever i get a hold of a camera.

[Pete]

this shit better be done by the end of the winter break

[Sal]

It will be... right now I have to get the car registered and insured so i can take it for a test drive and make sure everything is tight. As soon as i get the basemap from Jeff Evans, i can slap all the turbo stuff on there and get it tuned. As of right now the tuning appointment is scheduled for Jan 13th, but if all goes well and theres available spots i'm going to change it to something sooner.

[Pete]

cant wait! aj just ran a 12.43 and his shit still isnt tuned

[Sal]

Haha I love how every supercharged mustang in Cinnaminson runs 12.4

[Pete]

It's official, Sal has the fastest 13 second civic in Cinnaminson!

[KGP]

Lmao!

[Sal]

It's official, Sal has the fastest 13 second civic in Cinnaminson!

Haha yes I do.

[ex95coupe]

i finally seen that hatch at kmart lastnight been hereing about it this n that but that hatch looks good

[Pete]

i thought it had a broken axle and is sitting in sals driveway

[Sal]

Haha I finally stopped being lazy and slapped an axle in. Too bad it doesnt fit right.
ex95coupe, what were you driving?

[KGP]

Sal needs to post some pics up of this old project.... has been way overdue

[Pete]

need an update sal!