swap question

[KGP]

If installing an OBD1 B16 motor/trans into an EK hatch, will there need to be any different rear bracket or trans mount than the factory EK mounts?

[Huff]

Substitute the rear engine/tranny mount for the one off of the '99+ Civic Si. Happy swapping! :)

[lgjp2631]

use 94-01integra oem linkage.99-00 si rear mount should have a b stamped on it.side engine mount will work with b series oem engine mount bracket ok.no need to upgrade that.but you will have a problem because the 96 up ek has the crank sensor.i just did a b18 in a 97 civic.was a b!tch.but smooth at the same time.any problems hit me up.302-250-5505 anytime.later, jason